The materials we use in the production of torque arm are generally made of 45 or 40Cr steel. According to the drawings provided by customers, through a series of processes such as forging, tempering, lathe machining, hobbing, drilling, quenching, flaw detection, high-temperature tempering, testing and packaging, the torque arm products that meet the needs of customers are created.
지금 연락
Torque arm in wind power refers to an important structural part of wind turbine, which is used to convert wind energy into electric energy. The rotor of wind turbine usually includes impeller (blade), shaft and torque arm.
지금 연락
Our Baohua company is able to independently design and develop the die, which makes the torque arm forge in one shape, saves material greatly and improves the stability of the product. Moreover, Baohua has the finishing ability, which can cover many processes such as forging, machining, heat treatment, finishing and so on. Finally, the finished product can be delivered. And we can deliver according to customer needs in different delivery states. The torque arm is a suspension component mounted on the rear drive axle of rear wheel drive vehicles.
지금 연락
The torque arm we produce is mainly used in wind power generation industry, and it is an indispensable part of large fan blades.NAMETORQUE ARMMATERIAL334CrNiMo6HAEDNESS284-345INNER DIAMATER21OUTSIDE DIAMETER373Our Baohua Company was founded in 1969, and it has gone through three generations from state-owned to individual operation, covering an area of 140,000 ㎡, with 260 employees, 46 engineering technicians and more than 100 finishing operation equipment.The company's forging equipment mainly includes: five tons and three tons of free forging hammers, 2500 tons, 1000 tons and 600 tons of
지금 연락
The torque arm on wind power refers to the part between the main shaft of the wind turbine and the rotor of the generator, which converts the torque transmitted by the rotating main shaft into the power that the generator drives the rotor to rotate, thus generating electric energy.The torque arm produced by our company is mainly used as accessories for wind power generation equipment. Raw materials are purchased from round steel with recognized quality at home and abroad.
지금 연락
Gear is a commonly used mechanical transmission element, which is used to transmit torque and rotary motion. It consists of one or more tooth tips, usually in the shape of a disk or a cylinder. The main function of gear is to realize the transmission of speed and torque, and at the same time, it can also change the steering and transmission direction.NAMEGEARMATERIAL18CrNiM07-6HARDNESS140-240INNER DIAMETER121OUTSIDE DIAMETER299.48Our Baohua Company was founded in 1969. After three generations' hard work, it now covers an area of 50,000 ㎡ and has a building area of 25,000 ㎡.
지금 연락
The planet carrier is one of the main components of planetary gear transmission, and the planetary axle or bearing is mounted on the planet carrier. When the planetary gear is the basic component, it is the part of the mechanism that bears the greatest external torque.
지금 연락
Gear is a commonly used mechanical transmission element, which is used to transmit torque and rotary motion. It is composed of one or more tooth top parts, with tooth grooves or teeth marks, and the transmission of force and motion between gears is realized by meshing. Attached product information:MATERIAL18CrNiM07-6HARDNESS140-240INNER DIAMETER210OUTSIDE DIAMETER610Our Baohua Company was founded in 1969. After three generations' hard work, it now covers an area of 50,000 ㎡ and has a building area of 25,000 ㎡. There are 260 employees and 46 engineering technicians.
지금 연락
The internal gear ring is a kind of ring-shaped part with internal tooth structure, which is usually used in reducers and hydraulic machinery in mechanical transmission systems. The input speed and torque can be reduced and increased at the output end through the gear transmission of the internal gear ring.Baohua company was founded in 1969, from the initial initial processing to the industrial production of blank, quenching and tempering, rough machining, heat treatment, nitriding and finishing.
지금 연락
The middle shaft is a cylindrical object that passes through the middle of a bearing, wheel or gear, but a few of them are square. The middle shaft is a mechanical part that supports the rotating part and rotates with it to transmit motion, torque or bending moment. Generally, it is a metal round bar, and each section can have a different diameter. In the machine, the rotating parts are mounted on the shaft.The intermediate shaft forgings produced by our company are mainly used in equipment accessories of construction machinery industry, petroleum industry and wind power generation industry.
지금 연락
Flange has the advantages of high strength, good sealing, convenient maintenance, strong adaptability and reusability, which makes it an indispensable and important component in pipeline system. The following is the product information. MATERIAL4140-125KHARDNESS293-327INNER DIAMETER201.13OUTSIDE DIAMETER342.33Our Baohua Company was founded in 1969. After three generations' hard work, it now covers an area of 50,000 ㎡ and has a building area of 25,000 ㎡. There are 260 employees and 46 engineering technicians. The annual output of forgings is 30,000 tons.
지금 연락
Our baohua business enterprise has mould engineers to make molds consistent with the patron's quantity demand and carry out green manufacturing. material kinds and weights can also be made consistent with patron requirements. with a view to comprehend the precision forging of flange merchandise, make the cloth utilization rate reach above 90%, and greatly save the cost.Similarly, our agency also has difficult machining, warmth remedy and completing, which can be brought below specific delivery situations in keeping with patron necessities, saving time and cost.
지금 연락
There are no special requirements for the material of the supporting shaft. In the process of production, manufacturers mainly produce according to their actual availability. Basically follow the following principles:1. Select the materials for manufacturing the supporting shaft according to the use of the main parts. If it is used for support, it should be made of materials that can bear the support. If it is used for fixing, it is necessary to select materials that are convenient for welding the support shaft and the fixing point.2.
지금 연락
Selection of positioning datumThe machining sequence of the main surface of the gear shaft largely depends on the selection of the positioning datum. The structural characteristics of shaft parts and the position accuracy requirements of the main surface of the spindle determine that taking the axis as the positioning datum is the most ideal. This not only ensures the unity of the datum, but also makes the positioning datum coincide with the design datum. Generally, the outer circle is the coarse datum, and the sharp holes at both ends of the shaft are the fine datum.
지금 연락
Our Baohua company has mold design engineers who can provide drawings according to customersIndependently designed and developed the mold, making the fixed shaft locking sleeve integrally forged, greatly saving materials, and improving the stability of the product. In addition, our company has the ability of finishing, which can cover multiple integrated processes such as forging, machining, heat treatment and finishing, and can finally achieve the delivery of finished products.
지금 연락
Flange is a common mechanical connector, which is used to connect two or more parts together and provide a stable connection. It is usually made of round metal or plastic and has some fixed holes for the perforation of bolts or screws.Material1020Inner Diameter342.9Outside Diameter550Our Baohua Company was founded in 1969. After three generations' hard work, it now covers an area of 50,000 ㎡ and has a building area of 25,000 ㎡. There are 260 employees and 46 engineering technicians. The annual output of forgings is 30,000 tons.
지금 연락
Gear is a common mechanical transmission device, which consists of one or more gears. The finished gear is mainly made of 18CrNiMo7-6. After turning, milling, drilling, planing, rolling, shaving, grinding and heat treatment. Further finish machining from primary machining. Details of this product are as follows:Product NameGear FinishedMaterial18CrNiMo7-6HARDNESS140-240INNER DIAMETER210OUTSIDE DIAMETER611Our Baohua Company was founded in 1969. After three generations' hard work, it now covers an area of 50,000 ㎡ and has a building area of 25,000 ㎡.
지금 연락
Our Baohua Company is a state-owned to private enterprise. The family business has a history of more than 60 years, from the initial forging iron pieces to the current rough processing, heat treatment and finishing of forgings. Instruments and equipment also closely follow the requirements of modern product production. At present, there are more than 80 processing equipment, as well as ZEISS CMM, Japanese small board profiler, gear detector, Ω MEGA tool setting instrument and other inspection and detection equipment.
지금 연락
The working medium used by the hydraulic press not only transfers the pressure, but also ensures that the working parts of the machine work sensitively, reliably, with long service life and less leakage. The basic requirements for working medium of hydraulic press are: ① proper fluidity and low compressibility to improve transmission efficiency; ② Able to prevent corrosion; ③ Good lubrication performance; ④ Easy to seal; ⑤ Stable performance, no deterioration after long-term operation.
지금 연락
For the forging and casting of screw tee, our Baohua Company mainly focuses on forging. Customers can make requests according to their own needs, and we will carry out forging production according to the drawings provided. Like simple and numerous products, our company's mold engineers improve the production speed and accuracy of products by building molds. For our enterprise itself, from the state-owned to the individual, it has gone through three generations of family management, and the equipment is constantly updated.
지금 연락
According to customer requirements, it can be made of 45#, 40Cr, 30CrMo, 35CrMo, 42CrMo, 18CrNiMo7-6 and other materials. According to different weights, it can be forged on different forging equipment units. The weight of forged products can reach 6kg-5000kg, Forging needs to be completed through heating, pre-forging, forming and other processes.Stainless steel forgings refer to the articles in which stainless steel materials are pressed to shape the required shape or suitable compression force through plastic deformation.This force is typically achieved by using a hammer or pressure.
지금 연락
Our company has ISO-9001 certificate, and the production of supporting shaft is integrally forged with a corresponding model of die forging hammer, with high efficiency and low cost. And various types of materials can be used, such as 42CrMo, 45#, 35CrMo, 4140, 4130, etc. After repeated heating pre-forging and die forging, the forging ratio is high and the durability is good. It is suitable for fitting installation of engineering machinery and wind power industry equipment.
지금 연락
According to customer requirements, 4140, 4130, 45 #, 40Cr, 30CrMo, 35CrMo, 42CrMo, 18CrNiMo7-6 and other materials can be made. Forging can be carried out on different forging equipment units according to different weights. The weight of forged products can reach 6kg-2000kg. Forging needs to be completed through heating, pre forging, forming, trimming and other processes to increase the forging ratio and stability of products. Flange forgings can be finished to meet the final assembly conditions.Threaded flange refers to a kind of flange which is connected with pipe by thread.
지금 연락
Flange, also known as flange or flange. Flange is a part of connecting shaft, which is used to connect pipe ends; It is also used for the flange on the inlet and outlet of equipment, and for the connection between two equipments, such as the flange of reducing pipe. Seal with flange gasket. Flanges are threaded (threaded), welded and clamped. Flanges are used in pairs. Threaded flanges can be used for low-pressure pipelines, and welded flanges can be used for pressures above 4 kg. Add a gasket between the two flanges and fasten them with bolts.
지금 연락
